卧式双涡流水力碎浆机Horizontal double vortex hydraulic pulper

一．双涡流水力碎浆机简介：

JHSS型双涡流水力碎浆机，是根据水力旋涡原理设计而成，比单涡流碎浆机节电30%以上。双涡流水力碎浆机采用双套传动，双套筛板和叶轮，加大了水力涡流剪切力和冲击力，促使废纸在叶轮高速旋转时产生的水力剪切作用下，快速碎解水化。设备在运转过程中废纸总是处在高速逆流中，从而使纸张和纸张、纤维与纤维之间相互磨擦，结合叶轮的剪切和水力的冲击与浸泡作用加快了纸料的分解，提高了产量，降低了电耗，提高了生产效率。

本机设计新颖合理，操作简单，是中小造纸厂家倍受青睐的产品。

一、概述

   JHSS Double vortex hydraulic pulper is designed with reference to the principle of hydraulic shear vortex, which saves more than 30% electricity than single vortex hydraulic pulper.。The double eddy current hydraulic pulping machine adopts two sets of transmission systems, two sets of sieve plates and two sets of pulping impellers, which are installed in parallel and at different speeds in the same direction, which increases the hydraulic eddy current shear force and impact force.，Promote waste paper to decompose and hydrate rapidly under the action of hydraulic shear force generated by high-speed rotation of impeller.。During the operation of the equipment, the waste paper is always in a high-speed countercurrent, so that the friction between the paper and the paper and between the fiber and the fiber, combined with impeller beating and hydraulic impact and soaking, speeds up the decomposition speed of the paper and increases the output. The power consumption is reduced and the production efficiency is improved。

This machine is a popular product of small and medium-sized paper manufacturers because of its novel and reasonable design and simple operation.

二．设备规格及参数Equipment specifications and parameters：

注：筛孔直径可根据用户需要制作。Note: the diameter of sieve hole can be made according to the needs of users.

三、设备实物照片